mbuild

• NT build 042 - Floor materials: Indentation when loading - General short time-testing
• NT build 058 - Walls in bathrooms: Waterthightness and resistance to water and moisture
• NT build 059 - Cladding materials: Indentation hardness
• NT build 062 - Partitions under horizontal static load: Rigidity
• NT build 063 - Vertical building surfaces: Resistance to glansing blows
• NT build 065 - Flooers in bathrooms: Watertightness
• NT build 066 - Walls: Resistace to hard body impact
• NT build 067 - Walls: Strenght en deflection under static point load
• NT build 095 - Plastic, aged: Thickness of oxidized layer
• NT build 106 - Building gaskets: Water absorption
• NT build 107 - Building gaskets: Rain oenetration
• NT build 108 - Building gaskets: Deformation resistance
• NT build 109 - Building gaskets: Compression set
• NT build 111 - Building gaskets: Resistance to solvents, salt spray, cleaning agents and other chemicals
• NT build 112 - Building gaskets: contact and migration stain
• NT build 113 - Building materials: Dimentional changes by changing humidity conditions
• NT build 115 - Structural wood - finger joints: Proof loading
• NT build 116 - Windows, windiw-doors, external doors, facades: Pulsating air pressure test
• NT build 118 - Steep roofs - Coverings: Tightness
• NT build 122 - Floors in sport centres: Impact dampening
• NT build 123 - Mortar joints: Dnsity - Radiometric method
• NT build 137 - Wall constructions: Strenght and rigidity
• NT build 138 - Flat roofs - Coverings: Bond Strenght
• NT build 141 - Adhesives for floor and wall coverings: Long term shear strenght
• NT build 142 - Adhesives for floor and wall coverings: Shear strenght
• NT build 143 - Adhesives for floor and wall coverings: Peel off strenght
• NT build 145 - Adhesives for floor and wall coverings: Discolouration of coverings
• NT build 146 - Adhesives for floor and wall coverings: Resistance against plasticiser
• NT build 147 - Building sealants: Ability to accomodate movements
• NT build 149 - Windows: Manoeuvrability
• NT build 150 - Dwellings: Radon daughter concentration
• NT build 199 - Concrete fresh: Chloride content
• NT build 200 - Concrete hardened: Dimensions of test specimens
• NT build 201 - Concrete: Making and curing of moulded test specimens for strenght tests
• NT build 202 - Concrete hardened: Sampling and treatment of cores for strenght tests
• NT build 203 - Concrete hardened: Compressive strenght of test specimens
• NT build 204 - Concrete hardened: Tensile strenght of test specimens
• NT build 205 - Concrete hardened: Modulus og elasticity in compression
• NT build 206 - Concrete hardened: Compressive strenght, accelerated curing for 24 hours
• NT build 207 - Concrete hardened: Density
• NT build 208 - Concrete hardened: Chloride content by Volhard Titration
• NT build 208s - Concrete, hardened: chloride content by volhard titration
• NT build 210 - Concrete, hardened: Rebound number
• NT build 211 - Concrete, hardened: Pullout strength
• NT build 212 - Concrete, hardened: Core bending test
• NT build 213 - Concrete, hardened: Ultrasonic pulse velocity
• NT build 214 - Building Materials: Formaldehyde emission - field test
• NT build 216 - Building Materials - Polyethylene Films: Properties and durability
• NT build 217 - Reinforcement: Corrosion resistance
• NT build 218 - Floors in sport centers: Dynamic point load strength
• NT build 219 - Building board and paper: Air permeance
• NT build 220 - Buildings: Local air tightness
• NT build 221 - Bituminous felts: Tensile strength and elongation at 23c
• NT build 222 - Bituminous felts: Tensile strength and elongation at temperatures other than 23c
• NT build 223 - Bituminous felts: Water content
• NT build 224 - Bituminous felts: Tear growth
• NT build 225 - Bituminous felts: Surface sliding
• NT build 226 - Bituminous felts: Low temperature pliability
• NT build 227 - Bituminous felts: Waterproofing properties
• NT build 228 - Building materials, coating systems on materials: Resistance and protective value
• NT build 229 - Building materials, coating systems on exterior wood: Performance -accelerated test
• NT build 230 - Bathroom floors: Watertightness
• NT build 231 - Dwellings: Indication of high annual radon daughter concentration
• NT build 232 - Buildings: Rate of ventilation in different parts of a building
• NT build 233 - Safety nets in constructional work: Performance
• NT build 234 - External doors: Air tightness and closing force
• NT build 235 - Windows: Resistance to condensation on the inner surface
• NT build 236 - Windows: Resistance to condensation inside the window
• NT build 237 - Vertical surfaces: assessment of visible soiling
• NT build 238 - Floor and wall coverings, adhesives: Direct pull strength
• NT build 239 - Floors: Flatness and slope
• NT build 240 - Concrete, hardened: Air void structure and air content
• NT build 241 - Cellular plastics, rigid: Dimensional stability
• NT build 242 - Nonwoven geotextiles: Plunger pull out test
• NT build 243 - Nonwoven geotextiles: Impact resistance - falling cone
• NT build 265 - Materials, thin: Water vapour permeability
• - Adhesives for floor and wall coverings: Resistance to humidity
• NT build 276 - Punched metal plate fasteners: Strength
• NT build 279 - Building materials - coatings: Water transmission
• NT build 280 - Building materials - coatings: Wetting and drying
• NT build 281 - Building facades - coatings: Performance
• NT build 295 - Sand: Alkali-silica reactivity acceterated test
• NT build 296 - Materials, thin: Light transmission
• NT build 297 - Floor and roof elements: Uniformly distributed loading
• NT build 298 - Building materials, tightening tapes: Performance
• NT build 299 - Glue joints: Integrity in structural laminated products for exterior use
• NT build 300 - Paint coatings, organic foil: Carbon dioxide diffusion resistance
• NT build 302 - Building materials, wood: Moisture content
• NT build 303 - Concrete: Making and curing of test specimens
• NT build 304 - Building materials: Ability to prevent dripping of condensation water
• NT build 305 - External wall elements: Freezing and thawing
• NT build 306 - Roof coverings: Strength of mechanical fasteners
• NT build 307 - Roof coverings: Wind load resistance
• NT build 313 - Particle boards: Shear strength parallel to the plane of the board
• NT build 315 - Particle boards: Shear strength perpendicular to the plane of the board
• NT build 316 - Particle boards: Modulus of elasticity in tension and tensile strength
• NT build 317 - Particle boards: Compression strength
• NT build 325 - Floor coverings: Assessment of visible soiling
• NT build 326 - Floors: Ease of cleaning
• NT build 327 - Light-weight beams of wood: Loadbearing capacity and rigidity
• NT build 328 - Insulating materials injected into loft: Density
• NT build 329 - Insulating materials injected into loft: Thickness
• NT build 330 - Floors in sport halls: Friction at rotating movement
• NT build 331 - Paint applied to wood: Water permeability
• NT build 332 - Bricks and masonry blocks: Density
• NT build 333 - Bricks and masonry blocks: Moisture content
• NT build 334 - Bricks and masonry blocks: Water absorption
• NT build 335 - Roof coverings: Puncture by impact
• NT build 336 - Roof coverings: Puncture, cumulative load
• NT build 337 - Roof coverings: Surface granules embedment
• NT build 338 - Coatings: Mould resistance
• NT build 339 - Building components - chimney elements: Mechanical testing
• NT build 340 - Relative air humidity: Calibration of electrical instruments
• NT build 341 - Floor structures: Deflection of light-weight structures subjected to a concentrated load
• NT build 342 - Coated building materials: Determination of water absorption/adsorption
• NT build 343 - Nails in wood: Bending strength
• NT build 344 - Gypsum board-surface treatment: Moisture protection capability
• NT build 346 - Building structures, moisture content: Neutron method
• NT build 347 - Ceiling boards, mineral fibres: Emission
• NT build 348 - Cellular plastics, rigid: Thermal conductivity
• NT build 350 - Concrete injection resin: Shear bond strength
• NT build 351 - Shotcrete, concrete base: Bond strength
• NT build 352 - Shotcrete: Shrinkage in sprayed sample slabs
• NT build 355 - Concrete, mortar and cement based repair materials: Chloride diffusion coefficient from migration cell experiments
• NT build 356 - Concrete, repairing materials and protective coating: Embedded steel method, chloride permeability
• NT build 357 - Concrete, repairing materialsand protective coating: Udc carbonation resistance
• NT build 358 - Building materials: Emission of volatile compounds, chamber method
• NT build 359 - Thermal insulation material: Porous thickness
• NT build 360 - Insulation materials, granulated: Air permeability
• NT build 361 - Concrete, hardened: Water-cement ratio
• NT build 362 - Wood frame walls: Racking test of sheathing materials
• NT build 363 - Concrete surfaces, organic paints: Acid resistance
• NT build 364 - Shotcrete: Frost resistance
• NT build 365 - Concrete, repair materials and protective coating: Bond strenght, direct pull-off test
• NT build 366 - Concrete, repair materials and protective coating: Shrinkage and swelling
• NT build 367 - Concrete, repair materials: Coefficient of thermal expansion
• NT build 368 - Concrete, repair materials: Capillary absorption
• NT build 369 - Concrete, repair materials: Water diffusion
• NT build 370 - Mortar, hardened: Cementcontentandaggregate-binder ratio
• NT build 371 - Sealed glazing units: Accelerated ageing
• NT build 372 - Surface coating, cement mortar: Anti-carbonation effect
• NT build 373 - Timber in structural sizes: Strength and modulus of elasticity in tension perpendicular to the grain
• NT build 374 - Timber in structural sizes: Strength and modulus of elasticity in compression perpendicular to the grain
• NT build 375 - Insulation material, underlay for roofing membranes: Resistance to deformation at elevated temperature
• NT build 377 - Protective paint coatings on steel: Accelerated corrosion test in high humidity air containing small amounts of sulphur dioxide
• NT build 378 - Timber in structural sizes: Determination of shear strength and shear modulus parallel to the grain
• NT build 381 - Concrete, hardened: Air void structure and air content
• NT build 382 - Building gaskets: Tear resistance
• NT build 384 - Floating floors: Structural classification
• NT build 385 - Insulation material as underlay for roofing membranes: Exposure to temperature variations
• NT build 386 - Insulation material as underlay for roofing membranes: Bowing under the effect of a thermal gradient
• NT build 387 - Insulation material as underlay for roofing membranes: Resistance to mechanical load on projecting ends
• NT build 388 - Concrete: Heat development
• NT build 389 - Wall coverings: Waterproofing on small test pieces
• NT build 419 - Masonry units: Frost resistance
• NT build 420 - Building materials, wood: Moisture content
• NT build 421 - Roofs: Watertightness under pulsating air pressure
• NT build 422 - Wood: Fracture energy in tension perpendicular to the NT build grain
• NT build 427 - Concrete, fresh: Compactibility with ic-tester (intensive compaction tester)
• NT build 428 - Concrete and mortar, polymer cement (pcc): Moulded test specimens – curing
• NT build 429 - Concrete and mortar, polymer cement (pcc): Consistency
• NT build 431 - Roof sarking: Impact resistance
• NT build 432 - Indoor climate, relative humidity: Measured by wooden probes
• NT build 433 - Concrete: Cracking tendency - exposure to drying during the first 24 hours
• NT build 434 - Roofing membrane underlay (insulation material): Ageing due to increased humidity and heat
• NT build 436 - Concrete and mortar: Binder content by calculation from chemical analysis
• NT build 437 - Concrete, hardened and mortar: Calcium oxide and soluble silica contents
• NT build 438 - Building materials: Emission of volatile compounds - field and laboratory emission cell (flec)
• NT build 439 - Concrete, hardened: Relative humidity measured in drilled holes
• NT build 440 - Mortar, hardened: Compressive strength by indentation tests
• NT build 441 - Gypsum and silicate boards: Moisture conditions characterised by electrical resistance
• NT build 442 - Masonry: Strength and modulus of elasticity in compression
• NT build 443 - Concrete, hardened: Accelerated chloride penetration
• NT build 444 - Concrete, autoclaved aerated: Length changes due to moisture variations
• NT build 448 - Wall coverings and bushings for water pipes and taps in bathrooms: Watertightness
• NT build 472 - Building materials: Degree of capillary saturation
• NT build 473 - Temperature and relative humidity of air: Measuring with a thermohygrograph
• NT build 474 - Relative humidity: Measuring with a dewpoint hygrometer
• NT build 475 - Relative humidity: Using electrical instruments with hygroscopic sensors
• NT build 476 - Concrete, fresh: Initial setting time and activation energy during setting
• NT build 477 - Floor screeds: Surface strength
• NT build 478 - Natural building elements: Shear strength of connections
• NT build 479 - Natural building stones: Coefficient of thermal expansion
• NT build 480 - Cement: Heat of hydration
• NT build 481 - Building materials: Retention curve and pore size distribution
• NT build 482 - Building materials: Emissions testing using climpaq
• NT build 483 - Mortar, hardened: Frost resistance
• NT build 484 - Building materials: Emission of volatile compounds – on - site measurements with field and laboratory emission cell (flec)
• NT build 485 – Aggregates: Frost resistance using 1% nacl
• NT build 485 (Edition 2) - Test for thermal and weathering properties of aggregates: Determination of resistance to freezing and thawing with/without salt
• NT build 486 - Aggregates: Size distribution
• NT build 487 – Masonry: Shear behaviour of bed joints at different levels of precompression
• NT build 488 – Roof tile underlays: Watertightness – tent effect.
• NT build 489 – Concrete, hardened, repair: Chloride penetration resistance of paint on concrete
• NT build 490 - Concrete, hardened: Self desiccation
• NT build 491 – Concrete and mortar, hardened: Fracture energi (mode 1) – three-point bend tests on notched beams
• NT build 492 – Concrete, mortar and cement-based repair materials: Chloride migration coefficient from non-steady-state migration experiments
• NT build 493 – Wall components: Resistance to impact from a large soft body
• NT build 494 - Floors in sports halls: Friction at rotating movement
• NT build 495 - Building materials and components in the vertical position: Exposure to accelerated climatic strains
• NT build 496 - Calibration of Gypsum blocks for Soil - Moisture measurements
• NT build 497 - Lightweight aggregates: Resistance to cyclic compressive loading
• NT build 498 - Lightweight aggregates: Compressibility and compressive strength after compaction by vibration
• NT build 499 - Cladding panels: Test for bowing
• NT build 500 - Cladding panels: Field method for measurement of bowing
• NT bulid 501 - Adhesive: Absorption of deformation
• NT build 502 - Liquid applied waterproofing systems: Accelerated ageing in alkaline environment
• NT build 503 - Lightweight aggregates for railway embankments- Resistance to cyclic compressive loading
• NT build 504 - Hydroscopic properties of Fire-retardant treated wood and wood-based products
• NT build 505 - Measurement of heat of hydration of cement with heat conduction calorimetry
• NT build 506 - Concrete, mortar, hardened: Water permeability of water-saturated concrete
• NT build 507 - Concrete, mortar and cement based repair materials: Quality control of fresh self-compacting concrete – Workability, air content, density and casting og test specimens
• NT build 508 - Test method – Load bearing mechanical fasteners for timber frame sheeting
• NT build 509 - Leaching of active ingredients from preservative-treated timber - Semi-field testing
• NT build 510 - Loose-fill insulation - Testing and modelling of creep alternating moisture conditions
• NT build 511 - Wedge splitting test method (WST): Fracture testing of fibre-reinforced concrete (Mode I)
• NT build 512 - Wooden I-beams: Test method for evaluation of flange/web glue bond quality
• NT build 513 - Timber structures - solid wood elements
• NT build 514 - Determination of sensitivity to accidental staining

Printervennlig versjon