mpoly

• NT poly 161 - Plastics - accelerated ageing in alkaline environment
• NT poly 162 - Organic coatings: Exposure to water of low conductivity
• NT poly 170 - Determination of the water absorption ability of anti-condensation paints
• NT poly 171 - plastics: Flow rate ratio (frr)
• NT poly 172 - Determination of chargeability of powder coatings by the kleber gun friction method
• NT poly 173 - Fibre reinforcement sheets for plastics: Compaction behaviour
• NT poly 174 - Fibre reinforcement sheets for plastics: Permeability
• NT poly 175 - Adhesive compounds: Tests for use in marine environments
• NT poly 176 - Spreading surface tension by the applied droplet method
• NT poly 177 - Determination of the injection performance of hydraulic injection moulding machines: Method A
• NT poly 178 - Determination of losses during injection on hydraulic injection moulding machines: Method B
• NT poly 179 - Reaction data of unsaturated polyester resin by thermal analysis
• NT poly 180 - Temperature prediction during cure for fibre reinforced unsaturated polyester materials
• NT poly 181 - Determination of amount of oil on surfaces
• NT poly 182 - Pressure pipe systems: Pvc fittings
• NT poly 183 - Fibre beds: In-plane permeability
• NT poly 184 - Elastic coatings: crack bridging performance
• NT poly 185 - Determination of flexibility and fatigue resistance of aged ballast tank coatings
• NT poly 186 - Determintation of the natural and organic polymer fibre content in needle-punched composite materials (MATS)
• NT poly 187 - Resistance to cyclic compressive loading with square wave-load
• NT poly 188 - Measurement of diffusion coefficients

Printervennlig versjon